Lanyard D Rings

These light weight welded D rings are a more rounded contour than either of our other version of light weight D rings ( here and ) . For heavy leather use, our heavy D rings are the usual choice, but for lighter weight garment leather, or fabric, vinyl, macrame and so forth this might be better suited for your purpose. These are welded D rings, so they perform much better than a non-welded one would.

These are made by forming wire (of the diameter specified in the listing) in the shape of the D ring. The seam at the base (hidden by your material when in use) is then welded, and finally the plating is applied. This differs from cast rings, which are poured as molten metal into a mold, and the resulting product is without a weld, and one solid piece. Non-welded wire rings are missing the weld at the joining point and are inherently much weaker, under load they can simply bend open.

The measurement, in inches, is the inner diameter of the ring, this is measured at the straight part of the D, and, therefore, is the size of the material which will fit correctly into the ring. This dimension is just slightly generous (a 2" ring may measure 2.05") so that there is no binding.

You can view the other D rings available in our line by looking at the navigation bar to your left.

Please see sizes available in the chart below.

Select the item(s) you wish to order, indicating quantities, then press add to cart
More information on case pricing is available here .

1-9 Pieces

Packs of 10

Packs of 50

Packs of 100

Case (Freight included)

Item /
Stock #

Click for
Close up

Thickness*

Enter Quantity

$ Each

Enter Quantity

$ per 10

Enter Quantity

$ per 50

Enter Quantity

$ per 100

Enter Quantity

$ per case**

1/2"
#577

2.5 mm

$0.34

$2.50
(0.250 each)

$10.50
(0.210 each)

$17.00
(0.170 each)

$ 644.93
(case of 5.000)

3/4"
#579

3.2 mm

$0.41

$2.90
(0.290 each)

$12.50
(0.250 each)

$20.00
(0.200 each)

$ 698.74
(case of 4.000)

1"
#581

4 mm

$0.48

$3.40
(0.340 each)

$14.50
(0.290 each)

$24.00
(0.240 each)

$ 460.27
(case of 2.000)

*A penny is 1.55mm thick, a mm is a little less than 1/16 of an inch. A nickel is almost exactly 2mm thick.
** Case pricing includes freight in the continental United States. Click for more information

This item is sold in "pre-packs". This means that only full quantities of even 50 pieces receive the 50 piece price,
100 receive the 100 piece price, and so forth.

Main Page Contact Us Your Security Terms of Sale Privacy Policy Acceptable Use of Products About Us